synology.forum архив спільноти · 2005–2022
ai.synology.forum →
ГлавнаяУстановка, Загрузка и Настройка › И снова о SMART

И снова о SMART

DreamCatcher699 · 14.06.2012

В общем жила-была у меня коробка DS-209 c DSM 4.0-2228 и двумя дисками WDEADS-32S2B0, и было мне счастье 3 года 2 года (ошибочка вышла) :).

Несколько дней назад коробка начала мерзостно пищать и моргать всякими светодиодами. Оказалось, что поврежден один из разделов и система рекомендовала все данные слить и раздел этот грохнуть. Отлтчно! Так я и сделал, все данные были перенесены на другую коробку а раздел прибит и отформатирован с проверкой.

После система стала материться на статус SMART. При тестировании смарта, тест не проходил. Я вытащил диск, воткнул его в стационар и натравил на него MHDD, который оттестил диск и сделал несколько ремапов. Втыкаю диск опять в коробку. Тесты смарта (короткий и длинный) проходят без ошибок, но состояние СМАРТ (дипетчер хранения->Управление жесткими дисками) все равно стоит "ненормально".

 

В связи с этим вопрос: а эту грустную надпись как-то можно убрать? Спрошу даже более в общем: откуда это состояние вообще берется если тесты пройдены без ошибок?

DreamCatcher699 · 14.06.2012

А вот что говорит smartctl --all /dev/hdb

 

smartctl 5.42 2011-10-20 r3458 [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green
Device Model:     WDC WD20EADS-32S2B0
Serial Number:    WD-WCAVY2180675
LU WWN Device Id: 5 0014ee 2ae9f6bbf
Firmware Version: 04.05G04
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Jun 14 12:59:10 2012 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (40680) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x303f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       128
  3 Spin_Up_Time            0x0027   141   137   021    Pre-fail  Always       -       9941
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       226
  5 Reallocated_Sector_Ct   0x0033   198   198   140    Pre-fail  Always       -       13
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   075   075   000    Old_age   Always       -       18561
10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       212
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       196
193 Load_Cycle_Count        0x0032   134   134   000    Old_age   Always       -       199946
194 Temperature_Celsius     0x0022   106   097   000    Old_age   Always       -       46
196 Reallocated_Event_Count 0x0032   198   198   000    Old_age   Always       -       2
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     18561         -
# 2  Extended offline    Completed without error       00%     18557         -
# 3  Extended offline    Completed without error       00%     18549         -
# 4  Extended offline    Aborted by host               90%     18543         -
# 5  Short offline       Completed without error       00%     18542         -
# 6  Extended offline    Interrupted (host reset)      90%     18523         -
# 7  Extended captive    Interrupted (host reset)      90%     18523         -
# 8  Extended offline    Completed without error       00%     18520         -
# 9  Extended offline    Aborted by host               90%     18501         -
#10  Short offline       Completed: read failure       10%     18482         3846691043
#11  Short offline       Completed without error       00%     13812         -
#12  Short offline       Completed without error       00%     12269         -
#13  Short offline       Completed without error       00%      9494         -
#14  Short offline       Completed without error       00%      1877         -
1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 2

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

DreamCatcher699 · 14.06.2012

В общем, есть такое подозрение, что если DSM 4.0 встречает в логах смарт хотя бы одну такую запись, тогда система начиает намекать на замену винта

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error

 

Комрады, откликнитесь! )))) Или я один такой у кого проблемы с диском?